韓國工程POM Kepital FG2015 產品特性：含15%玻纖增強，中等粘度，適用于對剛性、耐疲勞性、耐蠕變性和耐熱性要求特別高的產品
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

POM FG2015 物性表：

Specific Gravity	1.50	g/cm³	ASTM D792
Density	1.50	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	12	g/10 min	ASTM D1238
Melt Mass-Flow Rate (MFR)	12	g/10 min	ISO 1133
Molding Shrinkage - Flow (2.00 mm)	0.80	%	ASTM D955
Water Absorption (Equilibrium, 23°C, 60% RH)	0.20	%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	111	MPa	ASTM D638
Tensile Stress (Break, 23°C)	120	MPa	ISO 527-2
Tensile Elongation (Break, 23°C)	3.0	%	ASTM D638
Tensile Strain (Break, 23°C)	3.6	%	ISO 527-2
Flexural Modulus (23°C)	5350	MPa	ASTM D790
Flexural Modulus (23°C)	5200	MPa	ISO 178
Flexural Strength (23°C)	157	MPa	ASTM D790
Flexural Strength (23°C)	175	MPa	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	7.0	kJ/m²	ISO 179/1eA
Notched Izod Impact (3.20 mm)	69	J/m	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	164	°C	ASTM D648
Melting Temperature	165	°C	ASTM D3418