沙伯基礎創新ABS MG38F 產品特性：食品級，超高耐沖擊，良好的韌性，中等剛性
我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

ABS MG38F 物性表：

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)	3.7	g/10 min	ASTM D1238
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	15	g/10 min	ISO 1133
Molding Shrinkage - Flow (3.20 mm)	0.50 to 0.80	%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus 2	2140	MPa	ASTM D638
Tensile Strength 3 (Yield)	43.4	MPa	ASTM D638
Tensile Strength 3 (Break)	33.1	MPa	ASTM D638
Tensile Elongation 3 (Yield)	2.1	%	ASTM D638
Tensile Elongation 3 (Break)	26	%	ASTM D638
Flexural Modulus 4 (50.0 mm Span)	2210	MPa	ASTM D790
Flexural Strength 4 (Yield, 50.0 mm Span)	68.9	MPa	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	370	J/m	ASTM D256
Instrumented Dart Impact (23°C, Total Energy)	31.9	J	ASTM D3763
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm)	97.2	°C	ASTM D648
Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm)	82.2	°C	ASTM D648
Vicat Softening Temperature	98.9	°C	ASTM D1525 5
CLTE - Flow (-40 to 40°C)	0.000088	cm/cm/°C	ASTM E831
CLTE - Transverse (-40 to 40°C)	0.000086	cm/cm/°C	ASTM E831
Electrical	Nominal Value	Unit	Test Method
Arc Resistance (PLC) 6	PLC 5		ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (1.52 mm)	HB		UL 94
UL	Nominal Value	Unit	Test Method
RTI Str	60.0	°C	UL 746
RTI Imp	60.0	°C	UL 746
RTI Elec	60.0	°C	UL 746
Comparative Tracking Index (CTI) (PLC)	PLC 0		UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)	PLC 2		UL 746
Hot-wire Ignition (HWI) (PLC)	PLC 3		UL 746
High Amp Arc Ignition (HAI) (PLC)	PLC 0		UL 746
Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (240°C, 1000 sec^-1)	245	Pa·s	ASTM D3835