|
|||||||||||||||||||||||||||||||||
進口耐高壓電磁閥（進口電磁閥廠家）
美國歐可OKE耐高壓電磁閥由中國深圳日立閥門有限公司總代理
美國歐可OKE閥門在全球市場質量最認可閥門品牌之一
美國歐可OKE進口高溫電磁閥、進口高壓電磁閥、進口低溫電磁閥、進口高壓防爆電磁閥、進口防腐電磁閥、進口高壓蒸汽電磁閥、進口不銹鋼高壓電磁閥、進口高壓內螺紋電磁閥、進口水用電磁閥
美國歐可OKE進口高壓電磁閥應用范圍：廣泛應用在航天、船舶重工、石油化工、給排水、消防設備、食品醫療設備、清洗設備、景觀噴灌、加濕設備、液壓設備、測試設備、水廠等,工作壓力在6.4---100MPa的管道系統中。
美國歐可OKE進口高壓電磁閥產品特點：閥芯均為不銹鋼活塞式，活塞環不會被介質中的雜質卡死，動密封性能高,壽命長；活塞與金屬閥腔不產生直接摩擦，閥體安裝向無限制；專制線圈，不易燒毀；長時間停止動作重新啟動，動作同樣靈敏；最低啟動工作壓力0.5MPa。
進口高壓電磁閥主要技術參數：
產品規格：DN0.5DN200
閥體材質：不銹鋼
適用介質：水、氣、油、蒸汽、燃氣、腐蝕流體等
溫度范圍：-100+200
介質粘度：小于50C St(大于時需定制）
防護性能：防水、防爆（Exd IICT5)、防腐
接線方式：接線座式；引線式；插頭式
控制方式：常開、常閉
電源電壓：DC12127V； AC36380V
連接方式：內螺紋、法蘭（外螺紋和特殊接口可定做或加轉接頭）The United States and Europe OKE imported high temperature solenoid valve, high pressure, low temperature solenoid valve solenoid valve, inlet high-pressure explosion-proof solenoid valve, solenoid valve, the import of imported high pressure steam solenoid valve, stainless steel high pressure solenoid valve, electromagnetic valve, inlet high-pressure internal thread imported water solenoid valve
美國歐可OKE進口高壓電磁閥應用范圍：廣泛應用在航天、船舶重工、石油化工、給排水、消防設備、食品醫療設備、清洗設備、景觀噴灌、加濕設備、液壓設備、測試設備、水廠等,工作壓力在6.4---100MPa的管道系統中。
The United States and Europe OKE imported high pressure solenoid valve application scope: widely used in aerospace, shipbuilding heavy industry, petrochemical industry, water supply and drainage, fire fighting equipment, food, medical equipment, cleaning equipment, landscape irrigation, humidifying equipment, hydraulic equipment, test equipment, water, the working pressure in the pipeline system in 6.4---100MPa.
美國歐可OKE進口高壓電磁閥產品特點：閥芯均為不銹鋼活塞式，活塞環不會被介質中的雜質卡死，動密封性能高,壽命長；活塞與金屬閥腔不產生直接摩擦，閥體安裝向無限制；專制線圈，不易燒毀；長時間停止動作重新啟動，動作同樣靈敏；最低啟動工作壓力0.5MPa。
The United States and Europe OKE characteristics of imported high pressure electromagnetic valve: valve products are stainless steel piston, piston ring is not the impurities in the medium card dead animals, high sealing performance, long service life; the piston and the metal valve cavity produces no direct friction, the valve installed without restriction; autocratic coil, is not easy to be burned; long time stop restart also, the action sensitivity; minimum starting pressure of 0.5MPa.
進口高壓電磁閥主要技術參數：
The main technical parameters of imported high pressure solenoid valve:
產品規格：DN0.5DN200
Product specifications: DN0.5DN200
閥體材質：不銹鋼
Body material: stainless steel
適用介質：水、氣、油、蒸汽、燃氣、腐蝕流體等
Suitable medium: water, oil, gas, steam, gas, corrosive fluid
溫度范圍：-100+200
Temperature range: -100+200
介質粘度：小于50C St(大于時需定制）
The viscosity of the medium: less than 50C St (more than required custom)
防護性能：防水、防爆（Exd IICT5)、防腐
Protection performance: waterproof, explosion-proof, anti-corrosion (Exd IICT5)
接線方式：接線座式；引線式；插頭式
Connection: connection seat type; lead; plug
控制方式：常開、常閉
Control mode: normally open, normally closed
電源電壓：DC12127V； AC36380V
The power supply voltage: DC12127V; AC36380V
連接方式：內螺紋、法蘭（外螺紋和特殊接口可定做或加轉接頭
Connection: thread, flange (outside screw and special interface can be customized or adapter
泄 漏 量：零
進口高壓電磁閥工作原理：常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開；當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。常開：當線圈通電時，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。
美國歐可OKE進口高壓電磁閥規格尺寸：
產品代碼DM810
公稱通徑DN3DN4DN5DN6DN8
適用壓力0.570MPa
接口螺紋G1/4G3/8
閥體材質不銹鋼、304、316等
特殊功能可定制帶手動、帶止回功能
注：出口端壓力大于進口端壓力，介質會反向?qū)ā？砂惭b止回閥或訂制自帶止回功能的閥。電氣參數
常規電壓 220V AC 50/60Hz24V DC
DC：220V、110V、48V、12V
特制電壓 AC 50/60Hz：380V110V48V36V24V
額定功率 AC:通徑≤25mm,45VA; ≥32mm,70VA
DC:通徑≤25mm,40W; ≥32mm,65W
電壓公差 ±10%
電氣連接 普通型：標準接線盒;
防爆型：M20ｘ1.5內螺紋,內置接線盒（可定制G1/2或NPT螺紋）
深圳日立閥門有限公司訂貨須知：
一、請向我們提供您的使用參數：1.公稱通徑、額定流量系數KV；2.流體性質（包括公稱壓力、溫度、粘度或酸堿性）；3.使用電壓；4.工作形式：常開式、常閉式；5.連接方式：法蘭、螺紋；6.閥體材質；7.是否帶附件，說明附件型號。以便我們的為您正確選型。
二、若已經由設計單位選定我公司（的產品型號，請按型號直接向我司銷售部訂
